The NeoPod universal adapter is designed for sling swivel studs mounted on the underside of the forearm. It works equally well with US 8mm studs and European 6mm studs. Shown above are GrovTec sling swivel studs. Here’s a Blaser with wood screw sling swivel stud fitted horizontally: There is no NeoPod adapter for this kind […]
The NeoPod consists of three main parts: right and left legs and the central section, or yoke. To replace any of these parts follow the steps below. You’ll need a 3mm hex/allen/unbraco wrench: Make a note of the torque applied to the screws Disassemble the legs from the yoke. It should look like this: Remove […]
The NeoPod Ultralight Hunting Bipod comes with hinges. The gun should recoil freely backwards straight into your shoulder. You should be able to tell from the recoil whether you’ve made a good shot or not. If you own an Atlas, you’ll know what we mean. To make this happen, do not push forward with excessive force. Just […]
The NeoPod Ultralight Hunting Bipod has been designed with hinges. This is to let the gun recoil freely in a straight line into your shoulder. You should be able to tell from the recoil whether you’ve made a good shot or not. To make this work preload the bipod: just take up the slack between […]
The M12 is probably the the most exciting, new bolt rifle on the market today. We’re pleased to announce that you now can complement it with the bipod it deserves; the NeoPod© Ultralight Hunting Bipod. The adapter replaces the factory fitted sling swivel at the front of the stock of the Extreme, Impact and Trail models […]
Stronger and more flexible version of the central yoke standard from April 2016 There has been reports of breakage of the central section of the NeoPod. The test team has shot hundreds of pieces of game with bipod over the last years without ever experiencing similar failures. Our investigations revealed that it was all down […]
We are pleased to announce that the much awaited NeoPod adapter for Sauer is now shipping. The adapter replaces the push button at the tip of the forend on Sauer 202, 303 and 404.For the first time it’s possible to attach a bipod to to a Sauer without making alterations to the gun. The easiest […]
A flush cup is a good alternative to the common sling swivel stud. It retains the look and feel of expensive wooden stocks. To use a flush cup wit the NoePod standard adapter you need our sling stud adapter, SKU010. It comes with an extra high, 4mm, pad. It installs without tools. Just use the supplied […]
To get sufficient purchase on the allen screw holding the sling swivel you need to use a flexible bit holder. You can get this cheaply at any hardware store and here’s one we found on Amazon: flexible bit holder for Blaser